Vật lý trị liệu

82 41 lượt tải Tải xuống

Chia sẻ Báo cáo tài liệu

Ra'aed Alobaidi

Therapeutic Equipment’s Assist. Lect. Ra’aed Alobaidi

Application Technique for Fluidotherapy

Equipment Required

Fluidotherapy unit of appropriate size and shape for areas to be treated

Procedure

1. Remove all jewelry and clothing from the area to be treated and inspect the area.

2. Cover any open wounds with a plastic barrier to prevent the cellulose particles

from becoming lodged in the wound.

3. Extend the body part to be treated through the portal of the unit.

4. Secure the sleeve to prevent particles from escaping from the cabinet.

5. Set the temperature at 38° C to 48° C (100° F to 118° F).

6. Adjust the degree of agitation to achieve patient comfort.

7. The patient may move or exercise during the intervention.

8. Treat for 20 minutes.

Advantages

• Patient can move during the intervention to work on gaining AROM.

• Minimal pressure applied to the area being treated

• Temperature well-controlled and constant throughout intervention

• Easy to administer

Disadvantages

• Expensive equipment

• Limb must be in dependent position in some units, increasing the risk of edema

formation.

• The constant heat source may result in overheating.

• If the corn cob particles spill onto a smooth floor, they will make the floor

slippery.

Downloaded by Nga T??ng (ngahuong55@gmail.com)

lOMoARcPSD|36041561

Bấm Tải xuống để xem toàn bộ.

| 1/1

| | Tải xuống

Preview text:

lOMoARcPSD|36041561
Therapeutic Equipment’s Assist. Lect. Ra’aed Alobaidi
Application Technique for Fluidotherapy Equipment Required
Fluidotherapy unit of appropriate size and shape for areas to be treated Procedure
1. Remove all jewelry and clothing from the area to be treated and inspect the area.
2. Cover any open wounds with a plastic barrier to prevent the cellulose particles
from becoming lodged in the wound.
3. Extend the body part to be treated through the portal of the unit.
4. Secure the sleeve to prevent particles from escaping from the cabinet.
5. Set the temperature at 38° C to 48° C (100° F to 118° F).
6. Adjust the degree of agitation to achieve patient comfort.
7. The patient may move or exercise during the intervention. 8. Treat for 20 minutes. Advantages
• Patient can move during the intervention to work on gaining AROM.
• Minimal pressure applied to the area being treated
• Temperature well-controlled and constant throughout intervention • Easy to administer Disadvantages • Expensive equipment
• Limb must be in dependent position in some units, increasing the risk of edema formation.
• The constant heat source may result in overheating.
• If the corn cob particles spill onto a smooth floor, they will make the floor slippery. Ra'aed Alobaidi 1
Downloaded by Nga T??ng (ngahuong55@gmail.com)

Vật lý trị liệu

Thông tin :

Tài liệu liên quan: